To pair ECI 80D with your phone or tablet, please hold the Bluetooth pairing button
on the remote for 5 seconds. The display will change to “BT PAIR” when in pairing
mode. Go to your phone or tablet’s Bluetooth settings and look for “Electrocompaniet
ECI 80D” and connect to it. The next time you want to connect, there is no need for
To pair ECI 80D with your wireless headphones, please set the ECI 80D in
HEADPHONES mode by pressing the headphones button on the remote control.
Also, make sure that ECI80D is set to not receive Bluetooth audio by selecting any
input source except BT. Set your headphones to pairing mode (refer to your headphones
instruction manual for the correct procedure.)
When ECI 80D is in HEADPHONES mode and your wireless headphones are in
pairing mode, press the Bluetooth pairing button on the ECI 80D remote.
The display will change to “BT HP” and the ECI 80D will connect to your wireless
headphones. The indicator dot next to the Bluetooth connected symbol will blink when
connecting and stay solid when connected. Please note that in some instances, this
may take up to 30 seconds.
A valid and active connection will be indicated with a link between the indicator dots
for HEADPHONES mode and the Bluetooth connected symbol.
The next time you want to connect, there is no need for pairing. Just turn on your
headphones and the ECI 80D will connect automatically.
The ECI 80D will remember the last 5 paired units and connect to these automatically.