1. Power on TANA SL-1 and all available TANA L-1
2. Go to Settings - Output Settings - Speaker configuration, press "Scan". Wait until scan has finished, then you should see the master and all slaves on the screen. If some of them have "None" position, set them to proper positions using drop-down lists beside each speaker (mobile application) or drag and drop speakers to desired positions (tablet application).
*If not all speakers have been found, make sure that such speakers have solid yellow (middle) LED indicator on the top. If so, repeat step 2. If yellow LED indicator is blinking slowly (then it's looking for a previous master), tap fast on the standby button to get the light in the buttons. As soon as you can see light, press and hold all 3 buttons for 5 seconds until you see solid yellow LED indicator. Then you can repeat step 2.
**If you don't succeed in getting all speakers found in "Speaker configuration", unplug a power from the master and plug it again, then repeat step 2 after several minutes.
***Please note that positions names depend on a number of found speakers and a layout will be determined automatically. If you have only TANA SL-1 and no addon speakers, then there will be CENTER position and MONO layout, if you have TANA SL-1 and one TANA L-1, then layout will be STEREO and so on. The procedure to add any subsequent TANA L-1 is similar to how you've added first TANA L-1.
To remove any speakers, drag and drop a desired speaker icon into the trash bin (tablet application) or swipe left on the speaker and press «Delete» (mobile application).